Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Cameron, TX

Pressure Washing in Cameron, TX

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface. Typical cost $150-$600.

From the free quote to the final rinse, pressure washing in Cameron, TX follows a simple process: inspect, protect, clean, rinse and check.

How we clean it

Pressure washCleaning method

Signs you need pressure washing

  • Driveway or walkways look dark, gray or streaky
  • Green or black growth in shaded areas and along edges
  • Slippery surfaces after rain
  • Oil, rust or tire marks you can't scrub out
  • You're getting ready to sell, seal or paint

Where the grime comes from

  • Dirt and pollen that settle into the pores of concrete
  • Mold, mildew and algae in damp, shaded spots
  • Oil and fluid drips from vehicles
  • Rust from sprinklers, furniture and fertilizer
  • Tire marks and general foot traffic

Safe steps for homeowners

  • Sweep off leaves and loose debris so they don't stain
  • Blot fresh oil drips with cat litter or an absorbent right away
  • Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
  • Rinse pollen off with a garden hose during heavy pollen season

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Etched lines and 'zebra stripes' from holding a narrow tip too close
  • Water forced into window frames, door sills and siding laps
  • Damaged plants and lawns from chemical runoff
  • Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery

Our process for pressure washing

  1. Walk the property and note surfaces, stains and anything fragile
  2. Protect plants, outlets, lights and doors, and move small items
  3. Pre-treat organic growth and degrease oil spots
  4. Clean with the right pressure and a surface cleaner for even results
  5. Rinse, post-treat to slow regrowth, and walk the job with you

Typical pressure washing prices

$150-$600Typical range for a typical home's driveway, walkways and patio
1-4 hoursTypical time on site
Once a year for most homesRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving Cameron, TX and nearby towns

Shaded driveways, walkways and pool decks in Texas grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Crews serve all of Cameron (ZIP code 76520), plus Rockdale (13.7 mi), Hearne (22.8 mi), Bartlett (26.9 mi) and Temple (27.5 mi). Call (555) 010-0000 for a free quote in Cameron.

Pressure Washing: frequently asked questions

How much does pressure washing cost in Cameron, TX?

Pressure Washing typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pressure washing?

Pressure Washing is usually done with pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is pressure washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pressure washing?

Once a year for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Cameron, TX

Stucco Cleaning

Stucco and EIFS soft washing that removes green and black growth, dirt and rust stains without damaging the finish.

Typical $300-$800

Pool Deck Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$500

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Exterior Window Cleaning

Exterior window cleaning, often done with a house wash, including frames, sills and screens.

Typical $150-$400

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Pool Deck Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$500

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Cameron, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote